How many bags of concrete do I need?
Divide the finished concrete volume you need, including your chosen allowance, by the finished yield of one bag. Round the answer up to a whole bag. This calculator is for complete concrete mix; a bag of cement alone does not have an interchangeable yield.
Formula and worked example
Required volume = entered volume × (1 + allowance / 100). Whole bags = round up(required volume / yield per bag). Nominal purchased yield = whole bags × yield per bag. Surplus after rounding = purchased yield − required volume.
For 1 yd³, start with 27 ft³. At 5% allowance the requirement is 28.35 ft³. Using an 80 lb QUIKRETE No. 1101 bag at an approximate 0.60 ft³ yield: 28.35 / 0.60 = 47.25, so buy 48 bags. Their nominal yield is 28.8 ft³, leaving 0.45 ft³ beyond the allowance-adjusted requirement. At 0% allowance the same cubic yard needs exactly 45 bags.
Choose the actual product yield
The presets are specific to QUIKRETE Concrete Mix No. 1101. Its datasheet lists approximate yields of 0.30, 0.375, 0.45, 0.60 and 0.675 ft³ for the 40, 50, 60, 80 and 90 lb packages respectively. The 90 lb package has regional availability. These are not generic yields for all products with the same bag weight.
For other mixes, choose Custom bag yield and enter the finished concrete yield printed on the package or datasheet. Use cubic feet, cubic yards, cubic meters or liters. Do not enter dry bag volume, bag weight, or mixing water volume. Follow the product instructions for mixing and application.
Keep units and allowances consistent
The calculator converts the volume and yield into a common unit internally: 1 yd³ = 27 ft³, 1 ft³ = 0.028316846592 m³, and 1 L = 0.001 m³. Unit selectors keep the entered number, so choose the unit that matches your measurement. Manufacturer metric yield figures may be rounded; presets use the published ft³ values consistently.
If you copy an estimate that already includes waste from the Concrete or Concrete Slab calculator, enter 0% allowance here. Otherwise the allowance would be added again. Use the most precise available volume, since copying a rounded display can change a bag count near a whole-bag boundary.
Rounding and practical limits
The bag count uses the complete decimal values entered, without rounding intermediate quantities. Only the displayed volumes are rounded. The surplus is the amount beyond your allowance-adjusted requirement; it does not include the allowance itself. Actual product yield and site losses can vary, so confirm the label and your ordering assumptions.
This tool estimates bags from a known volume. It does not design concrete strength, slab thickness or a concrete mix. It supports up to 10,000,000 bags per estimate.
References